Print: TARVA nightstand | Bygga

Drawing step 1 of 16

Assembly guide

TARVA

Nightstand

45 min · one person · 16 steps · 10 panels · 54 fittings

Tools

Phillips screwdriver
Hammer
Tape measure (nice to have)
Drill (nice to have)
Pencil (nice to have)
Box cutter (nice to have)

Panels

ASide panel2×
BTop panel1×
CBottom panel1×
DBack panel1×
EDrawer front1×
FDrawer side2×
GDrawer bottom1×
HDrawer back1×

Fittings

Wooden dowel 8 × 30 mm12×
Cam bolt 34 mm8×
Drawer runner 320 mm2×
Screw 3.5 × 14 mm6×
Cam lock 15 mm8×
Nail 1.6 × 20 mm12×
Screw 4 × 30 mm4×
Knob 1×
Wall bracket 1×
Wall plug 8 × 35 mm (not in the box)1×
Screw 5 × 50 mm (not in the box)1×

Follow it in 3D, read out loud: www.usebygga.com/build/tarva-nightstandNot affiliated with IKEA. Check each step against the paper manual.

18×8×

Fit the dowels and bolts into both sides

22×4×

Screw the runners onto the sides

3

Attach the panels to one side

4

Add the other side

58×

Lock the cam locks

6

Turn it face down

TARVA, Nightstand2 / 4

7

Check that it's square

812×

Nail on the back panel

9

Stand it up

104×

Push the dowels into the drawer front

11

Attach the drawer sides

12

Slide in the drawer bottom

TARVA, Nightstand3 / 4

134×

Screw on the drawer back

14

Slide in the drawer

151×

Screw on the knobs

161×2×1×1×

Fix it to the wall

TARVA, Nightstand4 / 4