SMÅSTAD

Screw the cam bolts into the storage side and divider

Tap four dowels into the wardrobe top

Stand the top on the side

Stand the bottom on the side

Lock the bottom with two small cam locks

Screw the side to the top

Lock the top with two cam locks

Lay the divider on

Lock the divider with four cam locks

Put the bookcase top on and lock it

Screw the drawer rails into the bottom compartment

Slide in the drawer shelf

Put the bookcase bottom on and lock it

Screw the side to the drawer shelf

Screw six cam bolts into the divider

Stand the three shelves on the divider

Lock the shelves with six cam locks

Tap dowels into the plinth rails and stand them in

Put the plinth rails in

Screw ten cam bolts into the other side

Lay the side on

Lock the side with ten cam locks

Tap the glides into the bottom edges

Stand the storage up together

Screw the connector bolts into an end panel half

Tap five dowels into the same edge

Press in the connectors and join the halves

Turn the connectors to pull the halves together

Click on the connector covers

Lay the steel rails on the back guard and the front rail

Fix each rail with one screw

Screw the rails on with sixteen screws

Bolt the back guard to the end panel

Bolt the two cross boards to the back guard

Bolt the front rail to the end panel

Bolt the cross boards to the front rail

Tap a dowel into the front rail

Tap the glides into the end panel

Screw four cam bolts into the top of the storage

Stand the end guard on the storage

Lock the end guard with two cam locks

Turn the frame over onto the storage together

Lock the back guard with two small cam locks

Bolt the guards to the end guard

Screw two cam bolts into the storage for the back rail

Swing the back rail in

Screw the back rail to the end panel

Lock the back rail with two small cam locks

Bolt the front guard onto the front rail

Screw the front guard to the end panel

Bolt the cross boards to the storage

Tap fourteen dowels into the ladder sides

Stand the rungs in and put the other side on

Turn it over and screw two cam bolts into the top

Screw the other side to the rungs

Tap a glide into the foot of each side

Click the hand grips into the tops

Stand the ladder against the bed and screw it on

Lock the ladder with two cam locks

Screw the storage to the ladder

Stick the anti-slip strips on the rungs

Lay your mattress in

Screw eight cam bolts into the cabinet top and bottom

Stand the side and the back on the top

Lock the side with two cam locks

Tap in eight dowels and stand the uprights on

Lay the bottom on and lock the back

Turn it on its back and lock the bottom

Tap the glides into the bottom, then stand it up

Screw six cam bolts into the desk top

Lay the desk top on the cabinet

Lock the desk top with four cam locks

Press in the cable outlet

Carry the desk in under the bed together

Lock the desk top to the back rail

Screw the desk top to the storage

Cap the holes in the back guard

Cap the holes in the end panel and the cabinet

Plug the small holes in the storage

Screw the drawer rails into the desk cabinet

Press the stops into the drawer front panel (do this 2 times)

Push the sides onto the front panel (do this 2 times)

Slide in the drawer bottom (do this 2 times)

Lay the back on and lock it (do this 2 times)

Screw the bottom to the back (do this 2 times)

Screw the runners onto the drawer (do this 2 times)

Slide in all 2 drawers

Click on the drawer fronts

Press the stops into the drawer front panel

Push the sides onto the front panel

Slide in the drawer bottom

Lay the back on and lock it

Screw the bottom to the back

Screw the runners onto the drawer

Slide the drawer in

Click on the drawer front

Screw the rail brackets under the wardrobe top

Hang the suspension rail in the brackets

Fit the adjustable clothes rail

Screw the hinges into the doors

Hang the doors

Adjust the doors