SLÄKT

Screw the middle rail onto the divider

Fit a cam bolt and a dowel in each end panel

Push the end panels onto the rail

Tap three dowels into the back edges

Screw the back panel on

Lock the end panels to the middle rail

Screw in the two angle brackets

Tap six dowels into the front edges

Screw four cam bolts into the top front rail

Lay the top front rail on and lock it

Bolt the ends to the middle rail

Fit the bottom front rail

Screw on the six castors

Stand it up and screw in the corner braces

Screw in the drawer runners

Screw the slat rail along the middle rail

Fit the two catches on the back

Fit the cam bolts in the drawer fronts

Join the sides and back, then lock the front on

Screw the back to the sides

Slide in the drawer bottoms

Screw the runners onto the drawers

Hook in the first support bar

Hook in the second support bar

Slide in the drawers

Screw the caps into the catches

Lay the slatted base on

Clip on the four slat stops

Slide it under the bed and lock the catches