Print: PLATSA storage bench, 120 × 57 × 63 cm | Bygga

Drawing step 1 of 24

Assembly guide

PLATSA

Storage bench, 120 × 57 × 63 cm

20 min · one person · 24 steps · 18 panels · 103 fittings

Tools

Phillips screwdriver
Drill (nice to have)
Pencil (nice to have)
Spirit level (nice to have)
Box cutter (nice to have)

Panels

ASide panel4×
BTop and bottom panel4×
CBack panel2×
DTop1×
EShelf2×
FPull-out rail2×
GWire basket1×
HDoor2×

Fittings

Plastic clip 16×
Plastic clip 16×
Stud 30 × 22 mm4×
Foot 8×
Angle bracket 1×
Screw 4 × 10 mm10×
Cover cap 4×
Nut 10 mm8×
Screw 6 × 40 mm8×
Washer 22 mm4×
Cover cap 4×
Shelf pin 6 mm8×
Plastic clip 2×
Plastic clip 2×
Hinge 4×
Felt pad 4×
Wall plug 8 × 35 mm (not in the box)4×
Screw 5 × 50 mm (not in the box)4×

Follow it in 3D, read out loud: www.usebygga.com/build/platsa-storage-bench-120-x-57-x-63Not affiliated with IKEA. Check each step against the paper manual.

1

Click the top panel onto a side panel

2

Click on the bottom panel

3

Click on the other side panel

4

Slide in the back panel

58×8×

Lock the back with the rivets

62×

Press the wall spacers into the top

PLATSA, Storage bench, 120 × 57 × 63 cm2 / 5

74×

Screw in the adjustable feet

88×8×2×4×

Build the second frame the same way

9

Stand it up

101×4×

Join the frames with the plates

114×

Screw the caps onto the spacers

12

Push it against the wall

PLATSA, Storage bench, 120 × 57 × 63 cm3 / 5

13

Level it on the feet

148×

Press the sleeves into the top of the frame

15

Lay the top on

168×

Screw it on from inside

174×4×4×4×

Fix it to the wall

188×

Put in the shelves

PLATSA, Storage bench, 120 × 57 × 63 cm4 / 5

196×

Screw the pull-out rails to the sides

202×

Click the holders on and hang the baskets

212×

Clip the stops onto the rails

224×

Fit the hinges and hang the doors

234×

Push in the door bumpers

24

Adjust the doors

PLATSA, Storage bench, 120 × 57 × 63 cm5 / 5