Print: PAX corner wardrobe, 211/161 × 201 cm | Bygga

Drawing step 1 of 16

Assembly guide

PAX

Corner wardrobe, 211/161 × 201 cm

6 h 50 min · two people · 16 steps · 37 panels · 302 fittings

Tools

Phillips screwdriver
Hammer
Tape measure (nice to have)
Drill (nice to have)
Pencil (nice to have)
Box cutter (nice to have)

Panels

ASide panel6×
BTop panel2×
CBottom panel2×
DPlinth2×
EBack panel2×
FShelf4×
GClothes rail2×
HTop panel1×
JBottom panel1×
KPlinth1×
LBack panel1×
MShelf2×
NClothes rail1×
PSide panel2×
RTop panel1×
SBottom panel1×
TPlinth1×
UBack panel1×
VShelf4×

Fittings

Wooden dowel 8 × 30 mm40×
Cam bolt 34 mm32×
Cam lock 15 mm32×
Nail 1.6 × 20 mm128×
Shelf pin 5 mm40×
Screw 3.5 × 14 mm14×
Wall bracket 4×
Screw 4 × 30 mm12×
Wall plug 8 × 35 mm (not in the box)4×
Screw 5 × 50 mm (not in the box)4×

Follow it in 3D, read out loud: www.usebygga.com/build/pax-corner-wardrobe-211-161-x-201Not affiliated with IKEA. Check each step against the paper manual.

110×8×

Fit the dowels and bolts into both sides

2

Lay one side down and add the panels

3

Add the other side

48×

Lock the cam locks

5

Fit the plinth

6

Turn it face down

PAX, Corner wardrobe, 211/161 × 201 cm2 / 4

7

Check that it's square

832×

Nail on the back panel

9

Stand it up together

108×

Add the shelf pins and shelves

112×

Fit the clothes rail

12

Build another narrow wardrobe the same way

PAX, Corner wardrobe, 211/161 × 201 cm3 / 4

13

Build the wide wardrobe the same way

14

Build the corner unit

1512×

Stand them in the corner and screw them together

164×8×4×4×

Fix them to the wall

PAX, Corner wardrobe, 211/161 × 201 cm4 / 4