Print: PAX corner wardrobe, 210/180 × 236 cm | Bygga

Drawing step 1 of 16

Assembly guide

PAX

Corner wardrobe, 210/180 × 236 cm

6 h 50 min · two people · 16 steps · 37 panels · 312 fittings

Tools

Phillips screwdriver
Hammer
Tape measure (nice to have)
Drill (nice to have)
Pencil (nice to have)
Box cutter (nice to have)

Panels

ASide panel8×
BTop panel1×
CBottom panel1×
DPlinth1×
EBack panel1×
FShelf2×
GClothes rail1×
HTop panel1×
JBottom panel1×
KPlinth1×
LBack panel1×
MShelf2×
NClothes rail1×
PTop panel1×
RBottom panel1×
SPlinth1×
TBack panel1×
UShelf4×
VTop panel1×
WBottom panel1×
XPlinth1×
YBack panel1×
ZShelf2×
AAClothes rail1×

Fittings

Wooden dowel 8 × 30 mm40×
Cam bolt 34 mm32×
Cam lock 15 mm32×
Nail 1.6 × 20 mm142×
Shelf pin 5 mm40×
Screw 3.5 × 14 mm14×
Wall bracket 4×
Screw 4 × 30 mm8×
Wall plug 8 × 35 mm (not in the box)4×
Screw 5 × 50 mm (not in the box)4×

Follow it in 3D, read out loud: www.usebygga.com/build/pax-corner-wardrobe-210-180-x-236Not affiliated with IKEA. Check each step against the paper manual.

110×8×

Fit the dowels and bolts into both sides

2

Lay one side down and add the panels

3

Add the other side

48×

Lock the cam locks

5

Fit the plinth

6

Turn it face down

PAX, Corner wardrobe, 210/180 × 236 cm2 / 4

7

Check that it's square

836×

Nail on the back panel

9

Stand it up together

108×

Add the shelf pins and shelves

112×

Fit the clothes rail

12

Build the narrow wardrobe the same way

PAX, Corner wardrobe, 210/180 × 236 cm3 / 4

13

Build the corner unit

14

Build the wide wardrobe the same way

158×

Stand them in the corner and screw them together

164×8×4×4×

Fix them to the wall

PAX, Corner wardrobe, 210/180 × 236 cm4 / 4