Print: PAX / BERGSBO wardrobe | Bygga

Drawing step 1 of 16

Assembly guide

PAX / BERGSBO

Wardrobe

2 h · two people · 16 steps · 9 panels · 82 fittings

Tools

Phillips screwdriver
Hammer
Tape measure (nice to have)
Drill (nice to have)
Pencil (nice to have)
Box cutter (nice to have)

Panels

ASide panel2×
BTop panel1×
CBottom panel1×
DPlinth1×
EBack panel1×
FShelf1×
GClothes rail1×
HDoor1×

Fittings

Wooden dowel 8 × 30 mm10×
Cam bolt 34 mm8×
Cam lock 15 mm8×
Nail 1.6 × 20 mm34×
Shelf pin 5 mm4×
Screw 3.5 × 14 mm12×
Hinge 4×
Knob 1×
Wall bracket 1×
Wall plug 8 × 35 mm (not in the box)1×
Screw 5 × 50 mm (not in the box)1×

Follow it in 3D, read out loud: www.usebygga.com/build/pax-bergsbo-wardrobeNot affiliated with IKEA. Check each step against the paper manual.

110×8×

Fit the dowels and bolts into both sides

2

Lay one side down and add the panels

3

Add the other side

48×

Lock the cam locks

5

Fit the plinth

6

Turn it face down

PAX / BERGSBO, Wardrobe2 / 4

7

Check that it's square

834×

Nail on the back panel

9

Stand it up together

104×

Add the shelf pins and the shelf

112×

Fit the clothes rail

124×8×

Press the hinges into the door

PAX / BERGSBO, Wardrobe3 / 4

13

Hang the door

14

Line up the doors

151×

Screw on the knobs

161×2×1×1×

Fix it to the wall

PAX / BERGSBO, Wardrobe4 / 4