Print: MALM bedside table, 1 drawer | Bygga

Drawing step 1 of 15

Assembly guide

MALM

Bedside table, 1 drawer

45 min · one person · 15 steps · 10 panels · 51 fittings

Tools

Phillips screwdriver
Hammer
Tape measure (nice to have)
Drill (nice to have)
Pencil (nice to have)
Box cutter (nice to have)

Panels

ASide panel2×
BTop panel1×
CBottom panel1×
DBack panel1×
EDrawer front1×
FDrawer side2×
GDrawer bottom1×
HDrawer back1×

Fittings

Wooden dowel 8 × 30 mm12×
Cam bolt 34 mm8×
Drawer runner 420 mm2×
Screw 3.5 × 14 mm6×
Cam lock 15 mm8×
Nail 1.6 × 20 mm10×
Screw 4 × 30 mm4×
Wall bracket 1×
Wall plug 8 × 35 mm (not in the box)1×
Screw 5 × 50 mm (not in the box)1×

Follow it in 3D, read out loud: www.usebygga.com/build/malm-bedside-table-1-drawerNot affiliated with IKEA. Check each step against the paper manual.

18×8×

Fit the dowels and bolts into both sides

22×4×

Screw the runners onto the sides

3

Attach the panels to one side

4

Add the other side

58×

Lock the cam locks

6

Turn it face down

MALM, Bedside table, 1 drawer2 / 4

7

Check that it's square

810×

Nail on the back panel

9

Stand it up

104×

Push the dowels into the drawer front

11

Attach the drawer sides

12

Slide in the drawer bottom

MALM, Bedside table, 1 drawer3 / 4

134×

Screw on the drawer back

14

Slide in the drawer

151×2×1×1×

Fix it to the wall

MALM, Bedside table, 1 drawer4 / 4