112×
Tap the dowels into the two battens
Picnic table
40 min · two people · 24 steps · 20 panels · 104 fittings
Tap the dowels into the two battens
Turn the battens over
Bolt a strut to each batten
Lay a top panel upside down
Pin two more panels to it
Pin on the last panel
Press the battens onto the middle of the top
Tap a dowel into the end of each strut
Slide the long rails onto the batten ends
Bolt the rails to the top
Slide an end frame on
Bolt the frame to the top
Bolt the frame to the rails
Bolt the middle post to the strut
Slide the other end frame on
Bolt the frame to the top
Bolt the frame to the rails
Bolt the middle post to the strut
Turn the table over together
Pin the two halves of each bench together
Tap the dowels into the bench rails
Bolt the rails under each bench
Lower the benches between the end frames
Bolt the benches to the end frames