1
Slide the beam together
Underframe sit/stand f table tp, el, 146 × 70 cm
25 min · one person · 17 steps · 10 panels · 62 fittings
Slide the beam together
Bolt it at the length for the top
Push the motor columns into the beam ends
Bolt the columns to the beam
Screw on the end brackets
Push the A legs onto the columns
Bolt each leg to its column
Screw in the feet and turn it over
Plug the motor cables into the control box
Plug in the power supply
Clip the cable into the beam
Fit the cable net under the top
Raise the frame a little
Lay the top on the frame
Screw the top to the end brackets
Screw the control panel under the front edge
Reset it and level the feet