FREDDE

Screw the cam studs into the side frames

Bolt the back rail to one frame

Turn a sleeve onto the bolt

Slide the back panel onto the studs

Lock the back panel to the frame

Put on the other frame

Lock the back panel to the second frame

Screw each low shelf to its side panel

Fit the side panels into the frames

Lock the side panels

Lift the front rail in together

Turn the sleeves onto the front rail's bolts

Get the desk top ready

Tap two dowels into the back panel

Swing the desk top in

Lock the desk top

Screw the frames to the desk top

Press the caps onto the leg ends

Stand it up together

Tighten the rails

Screw the low shelves to the back rail

Hook on the brackets for the monitor shelf

Hang the cable bar at the back

Lay the monitor shelf on its brackets

Hook on the brackets for the top shelf

Drop in the back bar

Drop in the front bar

Lay the top shelf on its brackets

Screw the shelves to their brackets

Hang the right loop panel

Hang the left loop panel

Hook on the side shelf brackets

Lay the side shelves on

Screw the side shelves on

Press in the large cable grommets

Press in the small cable grommets

Screw the headphone hooks onto the front bar