Print: ENHET base cb f sink, 60 × 60 × 75 cm | Bygga

Drawing step 1 of 10

Assembly guide

ENHET

Base cb f sink, 60 × 60 × 75 cm

45 min · one person · 10 steps · 7 panels · 40 fittings

Tools

Phillips screwdriver
Hammer
Tape measure (nice to have)
Box cutter (nice to have)

Panels

ASide panel2×
BTop rail2×
CBottom panel1×
DPlinth1×
EBack panel1×

Fittings

Wooden dowel 8 × 30 mm10×
Cam bolt 34 mm8×
Cam lock 15 mm8×
Nail 1.6 × 20 mm14×

Follow it in 3D, read out loud: www.usebygga.com/build/enhet-base-cb-f-sink-60-x-60-x-75Not affiliated with IKEA. Check each step against the paper manual.

110×8×

Fit the dowels and bolts into both sides

2

Attach the panels to one side

3

Add the other side

48×

Lock the cam locks

5

Fit the plinth

6

Turn it face down

ENHET, Base cb f sink, 60 × 60 × 75 cm2 / 3

7

Check that it's square

814×

Nail on the back panel

9

Stand it up

10

Ready for the sink

ENHET, Base cb f sink, 60 × 60 × 75 cm3 / 3