Print: EKET media shelf, 70 × 35 × 35 cm | Bygga

Drawing step 1 of 9

Assembly guide

EKET

Media shelf, 70 × 35 × 35 cm

40 min · one person · 9 steps · 5 panels · 41 fittings

Tools

Phillips screwdriver
Hammer
Tape measure (nice to have)
Drill (nice to have)
Pencil (nice to have)
Spirit level (nice to have)
Box cutter (nice to have)

Panels

ASide panel2×
BTop panel1×
CBottom panel1×
DBack panel1×

Fittings

Wooden dowel 8 × 30 mm8×
Cam bolt 34 mm8×
Cam lock 15 mm8×
Nail 1.6 × 20 mm14×
Wall bracket 1×
Screw 3.5 × 14 mm2×
Wall plug 8 × 35 mm (not in the box)1×
Screw 5 × 50 mm (not in the box)1×

Follow it in 3D, read out loud: www.usebygga.com/build/eket-media-shelf-70-x-35-x-35Not affiliated with IKEA. Check each step against the paper manual.

18×8×

Fit the dowels and bolts into both sides

2

Attach the panels to one side

3

Add the other side

48×

Lock the cam locks

5

Turn it face down

6

Check that it's square

EKET, Media shelf, 70 × 35 × 35 cm2 / 3

714×

Nail on the back panel

8

Stand it up

91×2×1×1×

Hang it on the wall

EKET, Media shelf, 70 × 35 × 35 cm3 / 3