BILLY

Tap the dowels into the top, the fixed shelf and the shelf back

Screw the cam bolts into the top and the fixed shelf

Stand the shelf back on the fixed shelf

Lower the top onto the shelf back

Turn the cam locks in the shelf back

Screw the cam bolts into both sides

Lay one side down and stand the shelf box on it

Tap the dowels into the bottom rail

Stand the bottom rail on the side

Turn the cam locks

Lower the other side on

Turn the other cam locks

Stand it against the wall and screw on the brackets

Fix the brackets to the wall

Clip the covers over the brackets

Tap the dowels into the unit's bottom, shelf and one side

Screw the cam bolts into that side

Lay the side down and stand the bottom and shelf on it

Tap the small dowels into the castor rail

Bolt the castors with brakes onto the rail

Stand the castor rail on the side

Turn the cam locks

Tap two dowels into the other side

Screw the cam bolts into the other side

Lower the other side on

Turn the other cam locks

Lay it on its front and slide the back in

Screw the back wheels on

Fix the back with the push pins

Screw the castor arm under the bottom

Screw the roller plates onto the back board

Lay the front board against it

Screw the hinges across the joint

Screw the cam bolts into the front board

Hook the table top into the tracks

Roll the unit in and lower the table onto it

Turn the cam locks under the table top